Residential Cooling

There can be wide swings in daily temperature during early fall and spring in the DC area before buildings’ systems are transitioned. Transitioning mechanical systems from heating to cooling, and vice versa, may take a few days to accomplish. During the cooling transitional period, turn off heating units, turn on ventilating fans if available, and open windows (unless it is raining).

Check below to see which kind of HVAC unit your residence hall is furnished with.

Fan Coil Units

If your fan coil unit is not producing cool air, check that the thermostat is set to the appropriate temperature.

Below are a list of residential buildings that use Fan Coil Units:

1959 E Street
Amsterdam Hall
District Hall
Frances Scott Key Hall (FSK)
Fulbright Hall
Guthridge Hall
Lafayette Hall
Mitchell Hall
Munson Hall
Potomac Hall
Somers
South Hall
Townhouse Row
West Hall

Window Air Conditioners (AC)

If your window AC is not producing cool air, make sure the unit is plugged into an outlet. Some units will have a wall switch near the AC outlet. Make sure this is on. Check to make sure the unit is set to cool and not just fan.

Never use your air conditioning when outside temperatures are below 55° F, because the coil may freeze. During winter months, you may use the fan setting to cool down your room.

Below are a list of buildings that use window units:

2109 F Street
Building JJ
Madison Hall
Strong Hall

Heat Pumps

If your heat pump is not producing cool air, make sure the thermostat is set to the appropriate mode and temperature.

Below are a list of buildings that use building pumps:

Dakota Hall
International House
Thurston Hall

Central AC

If your building is not producing cool air, make sure the thermostat is set to the appropriate mode and temperature.

Below are a list of buildings that use building pumps:

Cole Hall
Clark Hall
Hensley Hall
Merriweather Hall
Sorority and Fraternity Townhouses